产品介绍
- 产品信息
- 产品名称:韩国工程塑料 POM FG2025
产品参数
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 |
| 基本性能 | 吸水率 | 23℃,60%RH | ASTM D-570 | 0.20 | % |
| 熔体流动速率 | ASTM D-1238 | 9 | g/10min |
| 物理性能 | 填充材料含有率 | 25 | % |
| 比重 | ASTM D-792 | 1.59 |
| 机械性能 | 伸缩率 | 23℃ | ASTM D-638 | 3 | % |
| 拉伸强度 | 23℃ | ASTM D-638 | 1450 | kgf/cm2 |
| 弯曲强度 | 23℃ | ASTM D-790 | 2100 | kgf/cm2 |
| 拉伸冲击强度 | 3.2mmt Stype | ASTM D-1822 | 180 | 曲折弹性率 | 23℃ | ASTM D-790 | 8.80 | 104kgf/cm2 |
| 断裂强度 | 2mmt | ASTM D-732 | 760 | kgf/cm2 |
| IZOD冲击强度 | Notch 3.2mmt | ASTM D-256 | 10 | 洛氏硬度 | M scale | ASTM D-785 | M95 |
| 电气性能 | 耐电压 | ASTM D-149 | 23 | KV/mm |
| 表面电阻率 | ASTM D-257 | 11016 | Ω |
| 体积电阻率 | ASTM D-257 | 11014 | Ω.cm |
| 加工性能 | 成型收缩率 | 3mmt,直径100mm | 0.5 | % |
| 热性能 | 燃烧性 | 0.8mmt | UL 94 | HB |
| 熔点 | 10℃/min | DSC Method | 165 | oC |
| 线膨胀系数 | 20oC-80oC | ASTM D-696 | 2~3 | 10-5cm/cm/°C |
| 热变形温度 | 18.6kgf/cm2 | ASTM D-648 | 163 | oC |
| 热变形温度 | 4.6kgf/cm2 | ASTM D-648 | 164 | oC |
GradesProcessingCharacteristicsClassificationNameHighviscosityF10-01
F10-02F10-03HMedium high viscosityF15-33MediumviscosityF20-03Medium low viscosityF25-03F25-03HLowviscosityF30-03Ultralow viscosityF40-03
Extrusion
(Rod,Sheet, Tube, Plate, Pipe) | - High toughness
- Reduced porosity and white mark |
Injection molding
(Thick part) | - High stiffness |
General injection molding
(Medium meltflow rate between F10 and F20) | - High toughness
- Proper for thick parts |
General injection molding
(Standard type) | - Standard and balanced property
- Generalinjection molded parts |
General injection molding
(Medium meltflow rate between F20 and F30) | - Generalinjection molded parts |
General injection molding
(Medium meltflow rate between F20 and F30) | - High stiffness |
General injection molding
(Highmelt flow rate) | - Multi-cavities parts
- Proper for thin and small shape parts |
General injection molding
(Ultra highmelt flow rate) | - Short cycle time
- Proper for thin and small shape parts |
GradesProcessingCharacteristicsClassificationNameGlassfiberreinforcedFG2025KFG2015FG2025Milledglass
fiberfilledMF3025Glass bead filledFB2030TalcumfilledTC3020WhiskerfilledFT2020
General injection molding
(Low content of glassfiber) | - High rigidity andhardness |
General injection molding
(Medium content of glassfiber) | - High stiffness and hardness |
General injection molding
(Highcontent of glassfiber) | - Highest stiffness,hardness and HDT
- Reducedthermal expansion and shrinkage |
| General injection molding | - Minimizedsink mark andwarp
- Reducedanisotropy |
| General injection molding | - Dimensional accuracy
- Minimizedsink mark andwarp |
| General injection molding | - Dimensional stability |
| General injection molding | - Improvedstiffness
- Dimensional stability |
GradesProcessingCharacteristicsClassificationNameImpactmodifiedTE-21TE-22TE-23
(FU2015)TE-24
(FU2020)TE-25
(FU2025)TE-24S
General injection molding
( Low wt% impact modifier) | - Improvedimpact strength and
toughness
- Reduced noiseand improved
surface property |
General injection molding
(Mediumwt% impact modifier) | - High impact strength
- Standardimpact modified
grade |
General injection molding
(Highwt% impact modifier) | - Ultra high impactstrength
- Flexibility |
GradesProcessingCharacteristicsClassificationNameConductiveET-20SET-20AFA-20Anti-staticFV-40ED-10
General injection molding
(Conductivecarbon black filled) | - Conductive
- GeneralType |
General injection molding
(Conductivecarbon black filled) | - Conductive
- Improved fuel resistance and
toughness |
General injection molding
(Carbonblack andcarbon fiber reinforced) | - Conductive
- High stiffness and high creep
strength |
General injection molding
(Ultra-low viscosityGrade) | - Anti-staticand reduction of noise
- Preventionof dust adhesion |
General injection molding and extrusion
(High viscosityGrade) | - Static dissipative-Improvedimpact strength |
GradesProcessingCharacteristicsClassificationNameNaturalcolorF20-52F30-52F20-52GF30-52GBlackF20-51F30-51F20-51U
General injection molding
(Mediumviscosity) | - UV / light resistance(variouscolor)
- Forinterior parts |
General injection molding
(Lowviscosity) |
General injection molding
(Mediumviscosity) | - UV / light resistance(variousColor)
- For lowgloss interior parts |
General injection molding
(Lowviscosity) |
General injection molding
(Medium viscosity) | - Weatherand UV / light resistance(filledwithCarbon Black)
- For interior and exterior parts |
General injection molding
(Lowviscosity) |
General injection molding
(Mediumviscosity | - Weatherand UV / light resistance (filledwith CarbonBlack)
- For interior and exterior parts with
improved impact strength |
GradesProcessingCharacteristicsClassificationNamePTFEFL2020SiliconTS-22HTS-25HTS-25AMoS2FM2020
FM2520SSpeciallubricantNX-20LO-21TX-21TX-31GR-30
General injection molding
(PTFEcontents: 20 %) | - High friction & wear resistance
- Low specific wear rate |
General injection molding
(Lowcontents) | - High friction & wear resistance
- HighPV limit value |
General injection molding
(Lowcontents) | - Highest friction & wear resistance
- Highest PV limit value |
General injection molding
(High contents) | - Highest friction & wear resistance
- For delaminationfreeand complicated part |
General injection molding
(MediumviscosityGrade) | - Low specific wearrate in condition of high load, low speedand against metal
- For Bearing, bush parts |
General injection molding
(MediumviscosityGrade) | - High friction and wear resistance and reduced noise
- Silicon free |
General injection molding
(MediumviscosityGrade) | - Highfrictionand wear resistance of plastics vs. metal |
General injection molding
(MediumviscosityGrade) | - High friction and wear resistance and reducednoise |
General injection molding
(LowviscosityGrade) |
General injection molding
(LowviscosityGrade) | - Dimensionalstability and cutting process-ability
- High frictionand wear resistance of plastics vs. metal |
粒子图片
用途说明
库存图片
售后说明
1、物流运费说明
店铺报价不含运费,运费由买家承担,拍下付款后,买家可自行安排自己熟悉的物流上门提货,也可由卖家安排物流,运费提付(货送到后运费直接付给物流即可)。根据到货地址远
近,及数量的多少,则运费不同。要货数量越多,运费越便宜。
2、在线下单
因塑胶行情价格波动较大,请用旺旺客服或电话直接询价确认后再拍。
- 3、在线支付
因塑胶行情价格波动较大,请拍下后当天内付款,不然不得不关闭交易喽~请体谅~ 4、退换货政策
到货后请买家仔细确认货物完好后再签收,否则如无质量问题,不退不换哦~
5、发票制度说明
本店既可以线下交易也可线上支付交易,已设置默认绑定的是公司账户支付宝,也可换绑私人卡支付宝,请拍前联系旺旺确认账户后再拍,谢谢啦~
